Supplies are limited, more are on the way!
If out of stock
Click "Add me to the Wait List" above for instant in-stock notification!
SLI Compatible!
Fits: nVidia 6800 GT, 6800 Ultra; nVidia
NV40 and NV45 256MB video cards that use nVidia reference design.
Will not fit: non-GT or Ultra NV40 cards or any 512MB versions. For 6800 and 6800LE coolers click
here.
Installation Guide included and can be downloaded as a .pdf by clicking
here. |
 |

|
| CoolMatic NV40/45 (with LED lighting) |
CoolMatic NV40/45 (without LED
lighting) |
 |
As special feature that is
available, the Cool Matic NV40/45 also has a version with LED lighting. A
Layer from light-conducting plastic is integrated in the cooler, which is lit up
from the rear with two super bright LEDS (included).
The effect of the LED lighting is substantially
more impressive than in the picture~! With the LED lighting variant the
lower PCI slot is blocked. The version without LED lighting the cooler
does not block the next PCI card location and is only ~15mm high!
|
Detail: The cooler has an integrated base plate
made from copper reaching the highest cooling performance. The internal flow
pattern ensures maximum cooling performance with optimal utilization the cooling
fluid. Beside GPU and memory, the voltage transformer of the NV40/45 board is
cooled!!
Assembly: The provided back plate guarantees the
the best contact pressure of the cooler and prevents a damage of the GPU core.
The assembly of the Cool Matic is very easy with accurate attention of the
assembling instructions. The existing original cooler of the video card simply
exchanges with the Cool Matic. The cooler can then be merged easily into the
existing water cooling circuit.
 |
Included are all parts needed for assembly:
Cool-Matic cooler (depending upon selection, with/without LED lighting)
Fittings: 8x1 angled compression. For 8mm ID (5/16") tubing
Back plate for the cooler assembly
Screws for the cooler assembly
Pressure fitting springs
Pressure heat pad
Thermal compound
LED lighting module (depending upon version)
Retail packaging
Manual- German/English
|
Need different fittings for larger tubing? Check out our
BSP to NPT thread
adaptor, allows you to use common NPT threaded fittings.
Note: Only use distilled water in connection with
InnovaProtect (sold
separately) as cooling agent!! Absolutely avoid the
contact of the cooler with methanol, ethanol or alcohol - This could damage the
cooler irreparably!!