|
|
The Cool-Matic
ATi was developed specially for ATi Radeon 9xxx graphic cards and cools
not only the GPU also the RAM!
This offers the best cooling
and maximum performance - with minimal sound.
|
The cooler blocks no PCI slots and is
compatible with Innovatek's 8mm water cooling system. The
Cool-Matics come with nylon screws for attaching securely to the card
through the existing attachment points. The two 8mm elbow
compression fittings swivel at the joint for added flexibility when
routing tubing.
|
Back side RAM coolers include a pass
through coupling fitting to connect the back to front. The contact
surface is one piece anodized aluminum with smooth raised beds for precise
seating on the GPU and RAM modules. Single use thermal paste packet
also included.
|
|
|
ATi Video Card Model |
GPU and RAM (front side) |
RAM only (Back side) |
9700 - 128MB
9800 - 128 MB
9800 PRO - 128MB
9800XT - 128MB
9800XT - 256MB |
Type A1- Front Side |
Type A2- Back side |
|
|
|
9800 - 256 MB
9800 PRO - 256MB
(Not for XT cards!) |
Type B1- Front Side |
Type B2- Back side |
|
Note: Not
compatible with AIW cards, consider the Graph-O-Matic
Rev3.0 and RAMsinks
for those applications.
Need different fittings for larger tubing? Check out our
BSP to NPT thread
adaptor, allows you to use common NPT threaded fittings.
Note: Only use distilled water in connection with
InnovaProtect (sold separately) as cooling agent!! Absolutely avoid the
contact of the cooler with methanol, ethanol or alcohol - This could damage the
cooler irreparably!!
