**Retaining clamps Sold
Separately** Available for AMD64, socket A, P4 478 and 775
Choose your color above, then go here to select the right clamp for your motherboard.
|

|
Case badge not included |
Performance that's on-par with the Rev3/4 blocks, the Innovatek X-Flow's unique design enables an optimal utilization of
water without any cross-section flow constriction, placing no special demands on
the pump or cooling system and offering great thermal transfer. The special
clamp anchors the cooler perfectly over the CPU core, the socket A clamp uses all 6 cleats on the motherboard's
socket and is tightened with an included hex wrench. The Intel P4 (478)
clamp simply attaches like a stock Intel heatsink. Available in four
colors.
ATTENTION: a dismantling of the housing can lead to the damage of the
water block!
Specs:
Fittings: 8mm (OD) Compression
The weight of the block (without clamp) : 370g
Size (without connections) : (lxwxh) 65x60x16 mm
Size (with connections) : (lxwxh) 65x60x39 mm
Copper base (d=9mm)
Colored housing is extruded aluminum
Also compatible:
Extra 8mm (ID) tubing
5/16
ID Tygon tubing
Various
8mm and 10mm fittings
See also the Innovatek
X-Flow for Intel XEON processors!