A must have for the overclocker's toolbox in an affordable size! One
drop of this laboratory grade silver conductive paint is all you need to bridge
traces on PCB's, CPU's, etc.
It's non-flammable conductive silver paint and dries quickly once applied, but
doesn't dry out in the bottle easily. It contains highly conductive silver
particles in an adhesive base originally used for mounting samples. Can be
applied with pin or small brush (not included).
CAUTION: SHAKE WELL BEFORE USING!
skin contact. Avoid breathing vapors, use with adequate ventilation. Ships anywhere with no restrictions.
We are not responsible for injury or equipment damage
from use of this product. No instructions provided, it's assumed you know
what you're doing!
New larger size! est. 1.2 gram quantity of
paint. (This is a 1/16 oz vial filled approximately 1/2 full)
New higher silver content!
Cellulosic plus denatured alcohol and water
Water, alcohol; depends on desired drying rate
Approximately 3-10 minutes at room temperature
< 0.4 ohm/cm2
available upon request