 |
 |
 |
|
The Tech Tray open-air PC workbench for mITX,
mATX, and ATX
motherboards. Now available in EATX, XL-ATX, and HPTX
This bare-bones, no-frills motherboard platform has many benefits of our 'regular' two-level benches (including the highly valued non-conductive properties!).
This mobo-only solution gently but securely cradles your motherboard on non-slip rubberized standoffs installed onto our highest quality, heavy-duty composite plastic bench surface (it weighs in at 2.5 lbs). Use this while you build, test, benchmark, or run your system on it permanently. Nylon bolts/nuts can be used on 7 of the 10 rubberized motherboard standoffs and extra nylon bolts/nuts and steel screws are included so you can choose which standoffs get the extra security.
Many config options available to add only the features you want!
Adding a fan is recommended to move air across passively cooled motherboard components.
Fan choices include either 120mm or 140mm fan(s) in a variety of configs: Left side (CPU), or on the rear edge for GPU and/or CPU. We'll add the necessary pilot holes to the bench and include the fan, finger guard, 2 L brackets and all needed screws.
Already have fans? Just pick a Hardware Only option! That gives you the pre-drilled mounting points, L brackets, and attachment screws.
Need motherboard-level support for GPUs or other add-in cards?
Choose the Add-in Card support brace system option. This includes 2x 5" vertical supports and our (purposely) flexible card support brace with 7 nylon thumbscrews and all mounting hardware included. (Note, the Card Brace uses the two corner holes on the I/O ports side.)
Choice of Foot type:
- Either screw-on or adhesive backed - both rubberized anti-vibe, anti-slip!
- Adhesive backed are simple and cost effective: 3/4" x 3/4" x 3/8"
- Screwed-on use our anti-slip/vibe rubber feet secured by internal screw/washer. We'll add the needed pilot holes on each corner for mounting. 5/8" OD, 7/16" High
- Or, skip the feet and have 4 corner through-holes added (to use with your own mounting solution in your rack or shelving - zip ties work great!). Holes are 9/64 diameter (3.4mm) (no feet included with this option). If corner holes are selected along with the Card Brace only the two rear-facing corner holes will be open.
Other options include:
- 3.5" hard drives/SSD's mounting brackets (soon!)
- Either our ATX Control Kit or ATX Power Bracket for power on/off/reset and LED duties
- PSU Storage options include a PSU Bracket (soon!), a custom cut 8" x 11" Neoprene ant-static, non-slip work mat (Or use the mat separately as a cushioned surface for working on your other sensitive electronic hardware!). Larger neoprene mat sizes available
- Unassembled kit or fully assembled and ready to deploy
As with all our Tech Stations this comes with a lifetime support and warranty against defects!
| More info |
|
Assemble your own with our
easy-to-build kit version, or have us build it for you - we'll ship
it to you ready to use right out of the box! Either way you can
finally have a professional grade computer hardware testing station ready
to work for you in no time.
Traditional
alternatives
would include leaving components installed in the computer
case, which is an awkward and cramped environment for accessing hardware,
an ill-fitting frame assembly made of conductive metal, or just having
parts scattered around an open work area which is dangerous because
components are exposed and vulnerable to impact, shorting and
electrostatic discharge. And
how is the motherboard switched on/off without the PC case?
Our
test bench and ATX Control Switches solve all these problems. Now you can easily configure your hardware
exactly how you want it before installing it in your permanent
case! |
|
Custom designs available!
We can custom build units to your size requirements... Visit our custom quote form for details. |
| Notes:
All
Tech Stations come with a lifetime warranty against manufacturing
defects!
Satisfaction Guarantee: We realize the Tech Station is not for everybody, returns will be accepted
for 30 days after purchase date, even if assembled. Please see our
Sales Terms for details on returns.
Interested in becoming a reseller? See our Reseller
page for details. |
|
|
|
 |
|
 |
|
|
|
