good home for your hardware:
on ATX form factor motherboard specifications providing a full 13x13” of surface area for total accommodation
of all motherboards including mITX, mATX, ATX and extended ATX (server)
motherboard is perfectly secure in this version 2.0. A high friction
rubberized standoff system supports the motherboard 1/4" off the
bench surface (accommodates CPU cooler back plates and increases air
circulation) and positions the motherboard perfectly on the Tech Station
using two Nylon guide posts. Add-in cards are securely locked in place
with thumbscrews so the motherboard is safe yet available for hands-on
work and easily removed.
Top shelf, load it up:
The upper shelf is for
stacking the drives and power supply. Includes a neoprene mat to
make the entire shelf a non-slip and non-conductive work surface!
There is plenty of real estate here to hold optical, extra
hard disks and floppy drives, and the top shelf protects the motherboard
below from any possible impact from above.
Hard Drive Storage/Cooling Rail System:
standard 3.5" hard drives can be easily
inserted, protected and cooled by rails suspended under the top shelf. One
end of the HDD Rails open to catch air from the 120mm cooling fan.
Slide the HDD's in/out on smooth non-conductive acrylic rails.
Drive Rails are also available.
loose Add-in cards! The
AGP/PCI support brace solves the problem of loose motherboard add-in
cards, loose cards can damage circuitry.
The brace offers universal support for all add-in cards -
blocking no cables or connections, and has some lateral flexibility to
make adding/removing cards easy. Nylon thumb screws twist into the
top of the brace and are positioned at ATX form factor spec locations so
seven add-in cards can be locked in place. The support
brace can also be removed, flipped over and turned to support BTX form
the PC On/Off and monitor HDD activity: Plugging directly onto the motherboard, The
ATX Control Kit takes the place of the computer case power and
reset switches, power and hard disk drive activity lights, and system
warning speaker so that PC hardware can operate totally independent of a
standard computer case.
Tech Station is made of non-electrically conductive, scratch-resistant,
high grade polymers. Metal screws and brackets are not exposed in
sensitive areas, the motherboard rests on protective rubber standoffs,
the top shelf has a neoprene work mat, and the test bench sits on
non-slip thermoplastic rubber feet. No
worries of frying your hardware like with a metal bench.
12v DC fans positioned on the left side forcing air over heat sensitive
motherboard components and Hard Disk Drive(s)
under the top shelf.
of room to work: The
height between shelves is 7” offering adequate room for hands to reach
in and change components on the motherboard without having to remove the
motherboard completely from the test bench.
The bench can hold over 150 lbs!
Secure Motherboard Standoffs
ATX Control Kit