ATX Power Switch:
System power (on/off/standby) controlled by momentary switch attached to the
motherboard’s 2 pin power switch header.
Reset Switch:
Reboots PC without powering system off, attached to the motherboard's 2 pin reset switch header.
(either switch in this kit can be used)
System Power LED
(green):
Lights when power is ON.
Blinks when system is in standby or sleep. The Power LED +/- connectors are separate to allow for 2 pin or 3 pin configurations.
Hard Drive Activity LED (red):
2 pin connector. Blinks with hard
drive activity.
Notes:
-
See your motherboard manual for pin
locations and panel functions.
-
If LED's or switches won't function, or the HDD LED remains on
continuously, just pull them off the motherboard header and reverse
installation.
-
See
also our
ATX Control Kit - Its included with all Tech Stations
-
System
Alert Speaker not included, sold separately
